Always Look On The Bright Side Of Life

It gets scarier when you click on it.

New wheel getting built was not going to happen. Wrong axle length on the Bianchi, so I can't steal that wheel. The Gary Fisher wheel fits but I broke my 16t freehub cog a couple of months ago. A friend gave me an old shimano cassette. Put the 16t on the Gary Fisher wheel. Put road tire on wheel. Adjust brakes for new rim width. Test Ride. Wheel out of true, rear wheel bounces up and down like clown bike. Grab spoke wrench, first three spoke nipples dissolve when I attempt to rotate them (seriously, the nipples just crumbled). That wheel is now shot ( it has just under 5000 miles on it). After all of this I put the original wheel back on the bike and resign myself to a slower pace than I would like.
The bright side.
After reinstalling the 17t on the Gary Fisher wheel and properly spacing it on the cassette, I rode the bike around the block, Not only was the rear wheel a drunk simulator, the front wheel was making some tremendous noise. I realized that I had some cartridge bearings. I put the new bearings in the front hub and it now rolls smooth and quiet. It was a small victory, a victory that doe not make the bike any more useable at present but after this last week it was a victory I could celebrate nonetheless.

I Hate My Local Bike Shop

The Tour Of Pain is this weekend and there has been a snag, Last week I thought I had found a solution to my rear wheel problems when the Local Bike Shop closest to my house found an old single speed flip-flop hub that they could build me a wheel with. They said the wheel would be ready in a week. A week passed without a call, I called them yesterday and it went like this:
"I am just checking on my wheel."
"We have not opened the shipment with your hub in it, but the box is right here"
"I did not order a hub, you had a suntour flip-flop hub for me"
" turns out that was a tandem hub so we ordered you a different hub."
"What hub did you order me?"
"I don't know I haven't opened the box."

Why wouldn't they call and say they were ordering a part for me? Don't they think I would have a preference? Two hours later I get a call back.

"We have a wheel here for you."
"you built it that fast?"
"no we found a wheel already built and ready to go, I just need to adjust the chainline." (I am assuming that they scrambled to find a wheel after it was discovered they did not order the hub or ordered the wrong one.)
"What kind of wheel is it?"
"It's a nice alloy wheel."
Whiskey Tango Foxtrot. An alloy wheel, this is all he can tell me about it. I should have known this was going to be bad, but I decided that I was going to be glad that I had a solution to my problem.
I showed up at the shop on the bike that is going to get the wheel. I ran into some people I know and talked to them as the guy I had been talking to did some measuring of my chainline.
After an hour of him switching out spacers on the axle, I paid the hundred bucks for my generic wheel, strapped it to my rack and rode home. At home it did not take me long to figure out that the hub was in fact not a single speed hub, it is probably a 7 speed hub so old it has freewheel threads. The ridiculous thing is that after an hour of chainline adjustments the chain line was still off but that did not matter because the entire wheel was about an inch off center. Worthless.

All of this comes just a few weeks after I asked them to order a set of pedals. It would have been cheaper and faster to order them online but I want to support my LBS. A week later I show up at the shop (because no one called me). There was some hushed talking in the back room and then one guy lets me know that they forgot to order them and wanted to know if they should reorder. Several months before that I walked in with an extensive parts list for my new frame. It was well over $2000 of equipment. I asked if they could give me a price quote on the list so that I could see if it would work with my budget. the list had my email and cell number. Several weeks later, I was told that they gave the list to the owner but he was not around. I never did get the quote and they will never again see me step foot in that store. Just so you know, these are the last three examples, I have been struggling to make this relationship work ever since the only guy who knew what he was doing left a couple of years ago.
BTW, another local shop, Wheelsport South, emailed me back the parts list in the hour and for that they will get the $2000 to put the bike together.

Great Divide Race At The Half

The GDR powers have created a time cut off in Steamboat Springs that goes into effect tomorrow at noon. Racers must be LEAVING Steamboat at this time in order to be officially in the race. There is a lot of chatter about this rule and the pilot car issue of last week but in the end, neither of these matters is going to make a difference in the winning, record breaking or finishing of the race. It simply comes down to the simple fact that in order to finish you have to keep moving. I am surprised by the number of hotel stops by the racers this year. Matthew Lee has said that towns are obstacles that should be dealt with swiftly. Get in, get out.
Kent Peterson has pointed out that there is very little being said about the single speeders on the route. It appears that Nathan Bay is hanging in there and should make the cut off. Jeff Kerby has not made contact since Flagg Ranch and so things don't look good with him. Dave Nice the fixed gear rider has dropped out but was well below the cut off. Of course, as a fixed gear rider just finishing the route, no mater how long it took him, would have given him some place in history. I have not done the math to figure out if Kent's 22:03:09 single speed record is in jeopardy.
UPDATE: Jeff Kerby checked in from Steamboat so he is still in the race but it looks like he has fallen off of a record breaking single speed pace.

Less Training, More Practice

It turns out that the problem with getting my wheel being built before saturday's 200 miler is the lack of single speed hubs in this town. Half a million people in the metropolitan area and I couldn't come up with a bike shop that had a single speed hub. The wheel is being built with an old suntour flip/flop fixed/free hub. It has cartridge bearing so that makes me happy but the 36 spoke count is a bit much for the road bike. Even riding my road bike on trails frequently I have never had a problem with a 32 spoke rear wheel.
The Great Divide race is into it's second week and there are more people in the race than I would have expected by this time, though many are dangling below the pace that would allow them to finish within the 25 day time limit. Krein has updated the spreadsheet of the racers. I have found this page so fascinating that I plan on going back and putting all of the previous years into a similar format just to see what information i can glean about pacing, strategy and where people have problems,
Regardless of whether Jay Petervary breaks the record, wins or even finishes; one thing is for certain, his set up will be studied and copied by future racers. I expect that Jeff from Carousel Design Works will be extremely busy in the next year building bags for the next group of GDR riders. No rack is the future, especially for the front runners.

"Don't Train, Practice" Kent Peterson, Great Divide Race Single Speed Record Holder

I have mapped out the next three months of overnighters. It occurred to me that now is the best time to get a lot of the long fast overnighters in. It really puts the pressure on me to begin organizing my gear. I still don't have much in the way of a first aid kit. I need to have a better thought out tool and parts bag and I have not done much gas-n-go shopping. I really need to eat more candy bars and drink soda when riding. I should leave the house without any food or drink and make myself stock up on the fly. Economically it is not very smart but it would be good practice.

Tour Of Pain Is On Deck

I will be doing the 200 mile Tour of Pain next weekend. I am worked up about the whole thing for several reasons. I have never ridden two hundred miles on the road before. This is a bit odd to worry about because I have ridden over 200 miles off road many times with my longest single ride being 256 miles. I can't explain it but I think it is harder to ride long distance on the road. In the end it is a mental challenge and road riding can be the kind of monotony that makes the mind free to go to bad places.
I am also concerned about equipment. I am going to see if I can get a new wheel built up real quick like. With this being the busy season and Ironman this weekend the bike shops are going to laugh at my "how fast can you..". I know a few people who actually know things about bikes who might be able to help me out if things don't work out. Plan "C" is to put a 16t freewheel on the Bianchi wheel and use it on the Ibis.
I did think about using the Bianchi fixed gear for the dbl century but I did not like the idea of no bottle cages forcing all of the water onto my back during what will probably be 80+ degree temps. A bicycle angel bestowed upon me an On-One Midge Bar for the fixie. The track bars that were on the bike are the opposite of ergonomic which started bothering me when using the bike for 100 milers. The midge bar wrapped with some cushy specialized bar tape makes for a comfy ride. It has gotten me thinking about using the bar on the GDR bike build. The wide flared drops though not very aero provides a low position without much strain on the back.
As far as my goals for the 200 miler, I am not concerned with my speed much, you really can't be with one gear after all. I am instead going to focus on reducing non-moving time. If I keep moving I should be fine. I have had some good people helping me out lately and I would like to live up to their expectations for a good ride.

Ketchup Day

AS I follow this year's GDR I am keeping track of lessons being learned by this year's riders. In the attempt to keep things light it is easy to forget the rule of the mountains, be prepared for everything. All of the rider's have been drenched by thunderstorms and many of them met a snowstorm at elevation. Staying dry may not be an option but staying warm is a requirement. I remember a Summer vacation to Yellowstone when the high temperature was barely above freezing. Montana can be unforgiving.
I skipped the long ride today and instead made up some spoke cards for the midnight century ride. I may be doing the 200 mile Tour of Pain after all so I spent some time doing a rare bit of maintenance on my Ibis. I gave the Hakkalugi it's annual cleaning, switched the chain tensioner from up spring to down spring, installed a new rear tire on, put some leather treatment on the Brooks Saddle. The bike still has the 17 tooth freewheel on and if I am going to get through the double century than I will have to get that changed to a 16t.
The weather is heating up again so I want to get some long night rides in. Perhaps I will pre-ride the Tour of Pain route as an overnighter, that could be a good plan on Saturday night.

The 2007 Great Divide Race Begins

As I am writing this, the racers are nervously chatting about the weeks ahead. No doubt they are making frequent trips in and out of the Last Chance Tavern and checking their bikes and bags for the one hundredth time. The jovial sense of community will continue as they make their way down the long asphalt lead up to the dirt roads and mountains. Most races, tend to settle into the groove within minutes of the start but this race is different. It will take days to get into the rhythm of riding, eating, navigating, shopping, getting water, sleeping and repeating the basic elements of this death march they have interrupted their lives to participate in. In the coming days the race will educate the veterans and newbies alike. The endless planning to account for hundreds of scenarios will be forgotten because it is always the unexpected that happens. Reacting quickly and with a calm head will be more valuable than the equipment the racers carry with them. Remaining focused and fighting depression after navigational errors add mileage to the already long days total can be the difference between quitting and finishing.
It is easy to pursue unbearable hardship when you feel the awe and disbelief of people who shake their heads at your willingness to conquer the seemingly impossible. Hundreds of miles from anyone who could be impressed with your adventure, lost deep in your thoughts that refuse to stray from the pain and fatigue that grows with each pedal stroke, the racer is his only spectator and his only adversary.